有時候我們在使用的時候往往會由于自己熟悉操作流程而疏忽了操作前的檢查，其實在操作燃氣發電機組之前做好檢查是很有必要的，特別是在初春的季節。下面小編來為您講解下。

Sometimes when we use it, we often neglect the inspection before operation because we are familiar with the operation process. In fact, it is necessary to make a good inspection before operating the gas generator set, especially in the early spring. Let's talk about it.

1.用心檢查燃氣發電機組，保障沒有“三漏”問題，即：漏油、漏水、漏氣等現象。保障導線連接處的牢固。

1. Carefully check the gas generator set to ensure that there is no "three leakage" problem, namely: oil leakage, water leakage, gas leakage, etc. Ensure the wire connection is firm.

2.保障燃氣發電機組的潤滑油油位，如果不足，應使用同一品牌，同一質量的潤滑油補足。

2. Ensure the lubricating oil level of gas generator set. If it is insufficient, use the same brand and quality lubricating oil to supplement.

3.燃氣發電機組的電壓應在24—27V之間。

3. The voltage of gas generator set shall be 24-27V.

4.檢查冷卻液的液位，要確保冷卻液的充足。

4. Check the coolant level to ensure that the coolant is sufficient.

5.急停開關應在打開的狀態，以便于發生事故的時候自動彈出。保障燃氣發電機組的故障保護。

5. The emergency stop switch shall be in the open state, so that it can pop up automatically in case of an accident. Guarantee the fault protection of gas generator unit.

6.要確保輸出開關在斷開狀態，不能負荷啟動。

6. Make sure that the output switch is disconnected and cannot be started under load.

由于天氣逐漸變暖，戶外環境的變化使燃氣發電機組需要有一個適應的過程。再者，零部件由于在冬季風比較大，容易出現老化現象，所有出現老化的零部件都要進行更換。具體的檢查項目有以上幾點，您可以作為參考使用，更多詳細內容就來我們網站http://www.a7716.cn看看吧！

Due to the gradual warming of the weather and the change of the outdoor environment, the gas generator set needs to have a process of adaptation. Moreover, due to the strong wind in winter, parts are prone to aging, and all aging parts should be replaced. The specific inspection items have the above points, which can be used as a reference. More details can be found on our website http://www.a7716.cn Look!